ECi M1


 
M1 Calculators

 

M1 Calculators provide you with the ability to accurately estimate cycle times and material usage.

M1 Calculators estimate cycle times & material usage. Calculators provide you the ability to provide accurate quotes and save programming time.

 

The M1 Calculators available are Sheet, Laser, Bar and Punch. These calculators are the simplest tools for estimating cycle times and material usage so you can always provide accurate quotations. You can throw away that manual spreadsheet and you will never need to spend time programming in order to determine estimates.

 

With all of the M1 calculators the information calculated is retained with the parts so you can review and adjust calculations at any time.

 
Laser Calculator
The M1 laser calculator accurately calculates your cut time. You can store an unlimited number of material types with thickness, lead In/Out feed rates, external feed rates, pierce times etc.. for easy retrieval when doing quotations. Simply enter the number of holes and types along with the internal & external perimeter and M1 will calculate your total cut time.
 
Punch Calculator
The M1 Punch Calculator accurately calculates your punch time. Simply enter the number of tools, hit rate, repositions, tool changes and reposition times and M1 will calculate a total run time.

 

Bar Calculator
The M1 Bar Calculator accurately calculates your material usage per part. Simply specify part length, cut width, Face off & drop lengths and M1 will calculate the material usage and total number of bars required.

 
Sheet Calculator
The M1 Sheet Calculator accurately calculates your material usage per part. Simply specify part length & width, sheet length & width, top & bottom trim and part spacings and M1 will calculate number of parts per sheet including suggested rotation unless grain is a consideration

 

 


 
Home | White Paper Library | Case Study Library | Advisory Council | About Us | Contact Us | Privacy Policy | Site Map
© 2008-2016, Top10ERP.org. All rights reserved.